Lubrication Engineers
- Independent Manufacturer's Representative
Almasol® Syntemp Lubricant (9901)
Product Description
Synthetic, Non-Melting Grease Protects Metal Surfaces
LE’s Almasol® Syntemp Lubricant is an extremely tacky, high-temperature, extreme pressure (EP) grease made from a very heavy synthetic fluid and non-melting thickener. It is specially formulated to provide exceptional protection at temperatures at which petroleum oils would completely oxidize. This grease has exceptional water resistance, remains unaffected by boiling water and steam, and contains inhibitors that prevent rust and corrosion.
Almasol Syntemp Lubricant is excellent for use in any application where an extremely high-temperature lubricant is required, including large open gears, large industrial gears, oven chains, sliding surfaces, and large or slow-moving bearings. It contains Almasol®, LE’s exclusive solid wear-reducing additive.
Beneficial Qualities
Long Lasting & Heat Resistant
- Lasts much longer under high temperatures than ordinary lubricants
- Will not melt, liquefy or run during use Proprietary Additive LE’s proprietary additives are used exclusively in LE lubricants. Almasol Syntemp Lubricant
- Has high oxidation resistance, preventing formation of varnish, gum or carbon deposits
Water Resistant
- Resists water contamination, including boiling water or steam
- Will not wash off easily
Protective
- Is very sticky and adheres to metal; will not drip or fling off
- Protects against rust and corrosion
- Has superior wear-reducing characteristics
- Exhibits excellent mechanical stability
- Cushions gear teeth when heavy or shock loads are encountered
Other Info
Performance Requirements Met or Exceeded
- Diamond power soot blowers
Typical Applications
- Large open gears, including kiln girth gears
- Oven chains, cables, chains, and sliding surfaces
- Large bearings, especially those operating in high-temperature environment
- Low-speed plain bearings
Product Info
Lubrication Category
NLGI Grade
Thickener Type
Texture
Product Category
Applications
Available Container Size
• Case 40 Tubes
• Drum
• Pail
• Quarter Drum
Proprietary Additives
LE’s proprietary additives are used exclusively in LE lubricants. Almasol Syntemp Lubricant contains Almasol.
Almasol® solid wear-reducing additive is able to withstand extremely heavy loads, chemical attack and temperatures up to 1,900°F (1,038°C). It is attracted to metal surfaces, forming a microscopic layer but not building on itself or affecting clearances. Almasol minimizes metal-to-metal contact and the resulting friction, heat and wear.