Xport Oil and Grease Lubricators | Simalube Oil and Grease Lubricators | LubeSite Re-Fillable Grease Feeders

SINGLE POINT LUBRICATORS

ILC PumpA cost-effective, low maintenance way to deliver consistent amounts of grease to hard-to-reach lubrication points or where multiple lubrication points require different types of grease.

Lubrication Technologies, Inc. carries spring-loaded, electrochemical and electromechanical single-point lubricators.

All Single Point Lubricators, and pin point lubricators are available pre-filled with your choice of premium lubricants from Lubrication Engineers.

Simalube Oil and Grease Lubricators | LubeSite Re-Fillable Grease Feeders

LE Xport Single Point Lubricators

LE Xport Logo Add reliability to your lubrication program with dependable, automatic re-greasing
Incorrect or inadequate lubrication results in equipment damage that can lead to breakdown. In many cases, single point lubricators are the solution to this problem. With Xport Single Point Lubricators filled with LE lubricants, you can deliver the right lubricant, in the right amount, to the right place, at the right time – 24/7. Xport Single Point Lubricators filled with LE lubricants help eliminate costly manual lubrication. They literally pay for themselves by reducing downtime, part replacements, labor costs, and lubricant and machine contamination issues – all while increasing the safety of your operation.

LE Xport ™ Single Point Lubricators

  • Ensure critical applications receive lubricant 24/7
  • Eliminate application of the wrong lubricant, avoiding costly cross-contamination issues
  • Eliminate under- or over-application of lubricant
  • Increase safety with installation in hard-to-access locations
  • Keep dust and moisture out of the equipment with hermetically sealed lubrication points
LE Xport Single Point Lubricators are rugged, durable and easy to install. They are perfect for mining operations, steel manufacturers, power plants, water and wastewater treatment facilities, cement plants, food processing plants, and manufacturing facilities of all types. Xport SPLs are installed on millions of roller and slide bearings, blowers and fans, chains, pumps, presses, motors, open gears, and conveyors across the globe.


LE Xport Star Vario Lubricator

Xport Star Vario
Lubricator

Typical Applications:
Chains, electric motors, gear racks, open gears, roller and sliding bearings, shaft seals, sliding guides, spindles Typical Industries:
Environmental technology, food industry, oil and gas production, paper industry, pharmaceutical industry
LEX-VAR120-COKT
LEX-VAR60-COKT
LEX-VAR250-COKT

LE Xport Star Control Lubricator

Xport Star Control
Lubricator

Typical Applications:
Chains, electric motors, gear racks, open gears, roller and sliding bearings, shaft seals, sliding guides, spindles Typical Industries:
Mining, recycling industry, power plants, food industry, paper industry
LEX-VARCNTRL60-COKT
LEX-VARCNTRL120-COKT
LEX-VARCNTRL250-COKT

LE Xport Flex Lubricator

Xport Flex
Lubricator

Typical Applications:
Electric motors, open gears, pumps, roller bearings, sliding bearings
Typical Industries:
Food, mining, oil and gas, quarrying, refinery
LEX-FLEX125-COKT
LEX-FLEX60-COKT

LE Xport Classic Lubricator

Xport Classic
Complete Kit

Typical Applications:
Chains, gear racks, open gears, roller & sliding bearings, shaft seals, sliding guides, spindles
Typical Industries:
Automotive, mining, steel LEX-CLS120-COKT

LE Xport Futura Lubricator

Xport Futura
Lubricator

Typical Applications:
Blowers & fans, chains, conveyors, gear racks, open gears, roller & slider bearings, shaft seals, sliding guides, spindles
Typical Industries:
Cement, chemical, food, mining, recycling
LEX-FUT120-COKT

LE Xport Nova Lubricator

Xport Nova
Lubricator

Typical Applications:
Chains, electric motors, gear racks, open gears, roller & slider bearings, shaft seals, sliding guides
Typical Industries:
Cement, food, mining, oil and gas, power plants, recycling
LEX-NOVA125-COKT


LE Xport Star Vario Single Point Lubricators
LE Xport Star Vario

High-precision, easy-to-use lubrication system – independent of temperature & counter pressure
The LE Xport ™ Star Vario automatic single point lubricator operates fully automatically, independent of temperature, and offers a very precise discharge. It is ideal for applications that require precise lubricant metering, and is a preferred system for electric motors with very specific re-lubrication amounts.

The system consists of an electromechanical drive unit; a lubrication cartridge (LC) with a volume of 60, 120 or 250 cc (2.03, 4.06 or 8.45 fl oz); and a battery pack. The desired discharge period and LC size can easily be selected with the setting button and are immediately visible in the LCD. The current operating status is indicated on the LCD and via LED signal lights (red/green) that are visible all around and from a distance. The unit is protected against dust and water jets when the individual parts are assembled correctly.

Typical Industries
• Environmental technology
• Food industry
• Oil and gas production
• Paper industry
• Pharmaceutical industry

Featured Documents & Graphics

Xport Star Vario | Xport Star Control | Xport Flex | Xport Classic | Xport Futura | Xport Nova

LE Xport Star Control Single Point Lubricators
LE Xport Star Control

Time and impulse mode combined in a single system
The LE Xport ™ Star Control automatic single point lubricator is ideal for applications that require precise lubricant metering, and it is a preferred system for electric motors with very specific re-lubrication amounts. The Star Control is supplied with external power via cable, and its operating status can be transmitted to a PLC via this connection. This system offers two operating modes – time and impulse – for more flexibility. In time mode, lubricant dispensing is dependent on operating hours. In impulse mode, a precisely defined quantity is dispensed as soon as voltage is applied. The desired mode can be selected via the LCD.

The LE Star Control consists of an electromechanical drive with LCD and a lubricant cartridge (LC) with lubricant volume of 60, 120 or 250 cc (2.03, 4.06 or 8.45 fl oz). The system discharges exact amounts independent of temperature and counter pressure. It is protected against dust and water jets when the individual parts are assembled correctly.

Typical Industries
• Mining
• Recycling Industry
• Power Plants
• Food Industry
• Paper Industry

Featured Documents & Graphics

Xport Star Vario | Xport Star Control | Xport Flex | Xport Classic | Xport Futura | Xport Nova
LE Xport Flex Single Point Lubricators
LE Xport Flex

All-in-one flexible lubrication system in two compact sizes
The LE Xport ™ Flex automatic single point lubricator can be used for all types of industries and challenging applications, including inside and outside in a wide range of temperatures. Excellent ingress protection ensures reliable lubrication even in extremely dusty and moist environments. Available in two convenient sizes – 60 and 125 cc (2.03 and 4.23 fl oz) – the Flex is especially suited for installation in tight and restricted areas. The discharge period is flexible and can be adjusted from one to 12 months.

How It Works
The LE Flex comes fully assembled and ready-to-use. Simply turn to the desired discharge period, and the system is activated. The electronically controlled chemical reaction will build up the pressure that is necessary to continually supply the lubrication point with fresh lubricant. If necessary, the discharge period can be adjusted even after activation. And, it can be switched off during longer non-operation periods.

Typical Industries
• Food
• Mining
• Oil and gas
• Quarrying
• Refinery

Featured Documents & Graphics

Xport Star Vario | Xport Star Control | Xport Flex | Xport Classic | Xport Futura | Xport Nova
LE Xport Classic Single Point Lubricators
Xport Classic

Simple, robust, reliable lubrication system
The LE Xport ™ Classic automatic single point lubricator can be used for all applications with ambient temperatures of 0° to 40°C (32° to 104°F). The reliable operating principle is based on an electrochemical reaction. The lubrication period is determined by color-coded activator screws. Depending on your application’s requirement, you may choose to discharge 120 cc (4.06 fl oz) in a period of 1, 3, 6 or 12 months. The activator screw generates a maximum pressure of 4 bar (58 psi), which moves the piston forward and continuously injects small lubricant amounts into the lubrication point.

Typical Industries
• Automotive
• Mechanical engineering
• Mining
• Steel

Featured Documents & Graphics

Xport Star Vario | Xport Star Control | Xport Flex | Xport Classic | Xport Futura | Xport Nova
LE Xport Futura Single Point Lubricators
LE Xport Futura

Transparent housing with fill level indication
The LE Xport ™ Futura automatic single point lubricator is ideal for areas that must be kept hygienically clean or for harsh operating conditions that may lead to corrosion of metal lubricators or electronic systems. Due to its resistance to corrosion, it is especially suited for applications in the food industry.

Its reliable operating principle is based on an electrochemical reaction. The lubrication period is determined by colorcoded activator screws. Depending on your application’s requirement, you may choose to discharge 120 cc (4.06 fl oz) in a period of 1, 3, 6 or 12 months. The activator screw generates a maximum pressure of 4 bar (58 psi), which moves the piston forward and continuously injects small lubricant amounts into the lubrication point.

Typical Industries
• Cement
• Chemical
• Food
• Mining
• Recycling

Featured Documents & Graphics

Xport Star Vario | Xport Star Control | Xport Flex | Xport Classic | Xport Futura | Xport Nova
LE Xport Nova Single Point Lubricators
LE Xport Nova

The first temperature-independent electrochemical lubrication system
The LE Xport ™ Nova automatic single point lubricator can be used for all applications that are within a temperature range of -20° up to 60°C (-4° up to 140°F). It is ideal for areas with considerable temperature variations (e.g., outside installations) or where intrinsic safety is a requirement (e.g., oil and gas industry).

A discharge period of 1 to 12 months can be easily programmed by pushing the selection button on the Nova drive unit. A built-in temperature sensor periodically measures the ambient temperature, and the drive unit calculates the required gas generation based on this data. This ensures a continuous and controlled discharge. The Xport Nova consists of a reusable drive, a lubricant canister (LC) filled with 125 cc (4.2 fl oz) of grease or oil, and a protective cover.

Typical Industries
• Cement
• Food
• Mining
• Oil & gas
• Power plants
• Recycling

Featured Documents & Graphics

LE Xport Oil and Grease Lubricators | Simalube Oil and Grease Lubricators | LubeSite Re-Fillable Grease Feeders

SIMALUBE® AUTOMATIC GREASE & OIL LUBRICATORS

Simatec Logo Sold millions of times and suitable for any single-point lubricating task requiring grease or oil, Simalube® lubricators guarantee a consistent supply of lubricant in 12 selectable positions 24 hours per day - day in and day out. Shutdown times are decreased and costs in comparison to manual lubrication are reduced.

Simatec 125mlSimalube® lubricators are powered by a gas producing dry cell that builds pressure behind the piston inside the transparent housing, to dispense lubricant in accordance with the exact needs of the lubrication point - considering required temperature and pressure - with the simple twist of an allen wrench. Easily adjustable to dispense for periods from 1 - 12 months depending on dispensing cycle setting (0.04 to 8.3 ml per day). The dispensing cycle can be modified at any time. Simalube® lubricators can be refilled up to 3 times and are easily disposed of at the end of the third dispensing cycle, since they contain no toxic substances.

Simalube® Single Point Lubricators
Simalube®

Simatec accessories Accessories enable use of Simalube® lubricators in many different applications and in any position, even underwater. Don't see what you need here? Give us a call. 413-788-5823.

Item # Material Thread Size Reservoir Size Operating Temp. Dimensions
PRM-CLS Metal housing, plastic end cone Electromechanical drive 1/4" NPT 4.06 oz. (120 cc) 32°F to 104°F (0°C to +40°C) 70 mm x 99mm

WORK WITH US

We'll do everything we can to insure you get the best solution for your application!

TOP