ORLACO BACK-UP SAFETY CAMERAS
Orlaco Back-up Camera System | Orlaco Back-up Camera System with RadarEye | Orlaco All Time Vision Camera

ORLACO™ BACK-UP SAFETY CAMERAS

ORLACO BACK-UP SAFETY CAMERAS Lubrication Technologies, Inc. is an authorized representative for Orlaco by RMT - the only backup camera system specifically designed to stand up against the dust, dirt and constant vibration encountered in the heavy equipment industry.

Bring blind spots at the rear of trucks, construction equipment and forklifts into focus with the reversing camera system from Orlaco.

An Orlaco camera monitor system gives drivers the extra pair of eyes they need to work more safely, more efficiently and more comfortably. The rear view camera shows you the area immediately behind the vehicle or machine, and the monitor in the cab automatically switches to this camera when reverse gear is engaged. This vision solution not only helps to increase safety and efficiency, but also provides your drivers with greater comfort and ergonomics. Orlaco camera systems are manufactured in accordance with TS16949 — the highest achievable automotive quality standard.

Technology
An Orlaco rear view system consists of a reversing camera (input), a connecting cable (throughput) and a monitor (output). Most rear view systems have 4 pins (UNI): with an Orlaco 4-pin camera, an Orlaco 4-pin cable and an Orlaco monitor with a 4-pin video cable. You can use an Orlaco adapter cable to connect a 4-pin (UNI) system to a 7-pin (serial) system.

Each Orlaco monitor has two fixed cables — one video cable to connect the camera(s) and one power supply cable. Each system are powered by connecting the monitor to the vehicle's power supply using two power wires. The other wires from the power supply cable are switch wires that you can use to have a camera switch on automatically (direction of travel). Rear view systems often use a trigger wire in reverse to activate the camera automatically when reverse gear is engaged. ORLACO BACK-UP SAFETY CAMERAS

Reversing Camera
Orlaco offers a range of reversing cameras, including the popular 102º and 118º cameras. The cameras are available in various types, either as PAL or NTSC. A reversing camera is usually set up to show a mirror image. You can do this using the Orlaco monitor, but you can also opt for a standard MIRROR camera. This can be useful if you are connecting the Orlaco camera to a third party onboard information display rather than to an Orlaco monitor, for example. Securing Orlaco cameras to the vehicle is a straightforward process. If the camera cannot be positioned on the vehicle itself, or if the required field of vision is not achieved, the camera can be secured using special (extendable) brackets.

Cables
Shielded cables, dynamic cables and multi cables (standard cables) — all connection cables are specially developed by Orlaco to a high level of quality. The cables can be used with any vision system and are available in various lengths, both 4-pin (UNI system) and 7-pin (serial system). The standard multi cable is often used for a rear view system if there are no other special dynamic or mechanical requirements. In addition, interconnections between the truck and trailer, for example, can be created using one of our spiral, cab or trailer cables. Easy to install and operate, Orlaco's back-up camera systems are critical to the safety heavy equipment operators and those who work around them. Count on a system that works everyday and in any condition. ORLACO BACK-UP SAFETY CAMERAS

Monitor
Orlaco can provide 7" and 12" automotive monitors. The 7" monitors are available as either integrated (via a double DIN-slot) or built-on versions, and the 12" is only as built-on. The surface-mounted monitors are easy to secure using various multi-adjustable brackets on the dashboard, roof or elsewhere in the cab.

Multiple Cameras
All rear view camera systems can easily be expanded to up to four cameras. This allows you to create a combination with several rear view cameras or, for example, with extra side view, front view and process view on one vehicle.

All Orlaco 4CAM monitors are supplied with a video Y-cable with two video inputs (camera inputs) that you can use to connect two Orlaco cameras directly.

Three cameras can be connected using a switcher between the Orlaco camera and a monitor with a single video input. You can even connect four cameras to one monitor using a switcher in combination with a 4CAM monitor.

And you can switch between the cameras of these systems automatically using the monitor's switch wires, manually on the monitor, or via a connected controller.
ORLACO BACK-UP SAFETY CAMERAS
RadarEye — Active Reversing System
You can combine the reversing camera with our extremely robust RadarEye sensors to receive active (audible and visual) warnings of imminent danger. Find out more about RadarEye here.

Orlaco Back-up Camera System | Orlaco Back-up Camera System with RadarEye | Orlaco All Time Vision Camera
Orlaco™ Back-up Camera

Orlaco™ Back-up Camera

Orlaco™ Back-up Camera

Safety is becoming an ever increasing aspect in the industry.

Blind spots to the front and rear of heavy equipment are the most dangerous areas. Accidents caused by maneuvering, can be large unplanned expenses for a business. A camera system will dramatically reduce these costs.

Concrete trucks backing up often can be very dangerous and cause injury to citizens & workers nearby. A Track-Vision camera reduces operator blind spots and protects you better against a fatality.

When backing up a wheel loader in a quarry or around a crushing plant. Many operators confirmed the lack of visibility behind them, even using their mirrors.

Mining trucks backing up in the blasted area can avoid sharp rocks damaging tires, thus saving thousands of dollars in new tires.

Other applications of cameras are used for precision work. As an example, an excavator operator using a camera on the dipper stick looking at the digging area when visibility is difficult, becomes very handy.
Demolition applications with an excavator using a concrete pulverizer at the end of the dipper stick, gives the operator a better understanding of the structure to be torn down.

Applications
Trackvision is available for Heavy equipment like:
Wheel loaders • Backhoe • Excavators • Articulated haulers • Scraper haulers • Motor graders • Skid Steers • Mining equipment • Pavers • Demolition equipment • Crushing & screening plant • and more…

Monitor Features and Benefits:

  • Automatic brightness control: Monitor dims gradually when cab light levels decrease
  • Wide Screen 16:9 display ratio
  • Adjustable bracket
  • Monitor activates automatically once the vehicle is set to reverse mode
  • Long life Spring and Seals
  • Completely sealed, the Monitor is watertight...not just waterproof. You can soak it in water with no resulting damage!
  • Vibration and shock proof: Lab tested using high frequency shaker plates in hot and cold environments
  • Works on 12 or 24 volts with multiple internal precautionary features to guard against risk
  • On-Screen Display provides user-defined camera labels, help texts and menu options. All adjustments can be made from the cab.

Camera Features and Benefits:
  • Patented lens technology: darkening/lightening in accordance with lowlight/sunlight exposure
  • Camera tested to withstand a high pressure
  • 15L/minute washer flow of 80 bars at 80°C
  • 118° wide angle viewing "SEES" better in the dark than the human eye!
  • Nitrogen-filled to ensure positive pressure inside the "ball" - 100% watertight
  • Shock proof and vibration resistant
  • Aluminum casing with integrated sun cover
  • Heated lens prevents condensation or frost
  • Salt spray tested
Orlaco™ Back-up Camera

ORLACO SAFETY CAMERA STANDARD COMPLETE
TRV-1000-1-118
• In-CabWaterproof/Dustproof/Shockproof 7" LCD Color Monitor with Protective Stainless Steel Hood Cover
• Multi-directional Mounting Bracket
• AMOS 118º NTSC Camera with Setting for Automatic Turn-On hen Operator Backs Up/Automatic Turn-Off When Shifting Into Drive
• 11.0m/36 Feet of Cable with Molded Connector
TRV-1000-2-118
TRV-1000-3-118
TRV-1000-4-118
• Optional Cameras Allow Installation of Up to 4 Cameras on the Same Monitor • 2nd Camera, Bracket, Hood and Cable Package With Standard Kit Above • 3rd Camera, Bracket, Hood and Cable Package With Standard Kit Above • 4th Camera, Bracket, Hood and Cable Package With Standard Kit Above
Orlaco Back-up Camera System | Orlaco Back-up Camera System with RadarEye | Orlaco All Time Vision Camera
Orlaco™ Back-up Camera

Orlaco™ Back-up Camera With RadarEye

Orlaco™ Back-up Camera

RadarEye Features and Benefits:
RadarEye uses high performance radars combined with our cameras’ design with special software. When activated, it alerts the operator by an audio signal and graphic bar on the monitor precisely showing the object as it passes by the radar. The operator can respond faster. Its call; active safety!

Features and Benefits:

  • Direction area: 2 to 20 m, divided into 5 equal segments
  • Separation distance: 1-4m (configurable)
  • A buzzer sounds audible tones to alert operator of obstacles. The buzzer tone rate will increase as the vehicle gets closer to an object.
  • Antenna beam: Horizontal: 70º (typ.). Vertical 11º (typ.)
  • Waterproof
  • Operating temperature between -40°C to +85°C
  • Obstacle reaction delay: 50ms
  • Orlaco CAN bus radar monitor is required

ORLACO SAFETY CAMERA STANDARD COMPLETE
TRV-1000-1-118-Radar
• In-CabWaterproof/Dustproof/Shockproof 7" LCD Color Monitor Radar 6 with Protective Stainless Steel Hood Cover
• Multi-Directional Mounting Bracket
• AMOS 118º NTSC Camera with Setting for Automatic Turn-On hen Operator Backs Up/Automatic Turn-Off When Shifting Into Drive
• Two Radar SRD Sensors, CAN, Vertical with Mounting Brackets
• Interface with External Speaker
• 21m/68 Feet of Heavy-Duty Cables and Connectors
• M12 Terminator (120 Ohm) and 20m/65 Feet of M12 Cable
Orlaco™ Back-up Camera RadarEye
Orlaco Back-up Camera System | Orlaco Back-up Camera System with RadarEye | Orlaco All Time Vision Camera
Orlaco™ Back-up Camera

Orlaco™ All Time Vision Camera

Orlaco™ Back-up Camera

Self-Cleaning All Time Vision Features and Benefits:
Orlaco has now gone above and beyond by officially unveiling its newest vision product: the All Time Vision Camera (ATVC). Vehicle operators who constantly work in dusty, dirty, snowy, or rainy conditions can now receive non-stop vision feedback with the Orlaco All Time Vision Camera due to its' distinctive integrated self-cleaning mechanism.

The lens is built into a glass tube. When the cleaning cycle is activated, the tube rotates and fluid is sprayed onto the glass surface through a nozzle, and the glass surface is wiped clean with an integrated wiper. Activation can be done via the Monitor or via an input in the I/O Box.

The ATVC is designed to be used as a rearview camera(the default setting is Mirror Mode), but it can also be used as a side camera.



Features and Benefits:

  • Self cleaning Camera Set
  • 102 degree camera
  • 360º Rotation
  • 0.5m video cable 7p and 0.5m water hose with valve to connect to waterpump

ORLACO ALL TIME VISION CAMERA
TRV-1000-1-118-ATVC
• In-CabWaterproof/Dustproof/Shockproof 7" LCD Color Monitor Radar 6 with Protective Stainless Steel Hood Cover
• Multi-Directional Mounting Bracket
• ATVC 102º Camera
• Control unit for Input/Output ATVC
• 102 degree camera
• 0.5m video cable, 7p male connector (500 mm) and 0.5m water hose with valve to connect to waterpump

WORK WITH US

We'll do everything we can to insure you get the best solution for your application!

TOP Google Analytics: change UA-88235668-1 to be your site's ID.